Re: stepper power question(s)
Posted by
jmkasunich
on 2002-08-16 14:11:56 UTC
--- In CAD_CAM_EDM_DRO@y..., "mariss92705" <mariss92705@y...> wrote:
wanting to ID, NEMA 17, 23, and a couple size 34. Most don't have
all the specs printed on them. Do you have other "rule of thumb"
numbers for wattage, for the other frame sizes?
I assume single/double/triple stack has to do with the length of
the motor. Are these lengths standardized? Is there a website
or other resource that has all of the NEMA size motor dimensions?
Thanks,
John Kasunich
>I've got a whole box of surplus mystery steppers that I've been
> Figure 5W per coil for a single stack 23, 8W for a triple stack.
> W = I^2 * R, so I = square root of W / R. Make W = 5 and R = 1.1
> so I = 2.2A.
>
> Mariss
>
wanting to ID, NEMA 17, 23, and a couple size 34. Most don't have
all the specs printed on them. Do you have other "rule of thumb"
numbers for wattage, for the other frame sizes?
I assume single/double/triple stack has to do with the length of
the motor. Are these lengths standardized? Is there a website
or other resource that has all of the NEMA size motor dimensions?
Thanks,
John Kasunich
Discussion Thread
turbulatordude
2002-08-15 08:11:02 UTC
stepper power question(s)
JanRwl@A...
2002-08-15 08:50:30 UTC
Re: [CAD_CAM_EDM_DRO] stepper power question(s)
mariss92705
2002-08-15 10:54:46 UTC
Re: stepper power question(s)
turbulatordude
2002-08-15 19:56:18 UTC
Re: stepper power question(s)
mariss92705
2002-08-16 00:35:17 UTC
Re: stepper power question(s)
jmkasunich
2002-08-16 14:11:56 UTC
Re: stepper power question(s)
turbulatordude
2002-08-16 15:08:57 UTC
Re: stepper power question(s)
Tim Goldstein
2002-08-16 18:23:12 UTC
RE: [CAD_CAM_EDM_DRO] stepper power question(s)
mariss92705
2002-08-16 18:35:13 UTC
Re: stepper power question(s)