Re: Re: Grizzley and BOBCAD demo what's the trick ?

So Fred what's the magic trick to getting this demo ?

I fill in the form on the demo down load page, and there are two buttons

SendMail
ClearForm

Using my meager brain power I figured the next step must be "SendMail"
but that blows up and I get

MAIL NOT SENT. SMTP ERROR:

I have not tried the "Clear Form", As Spoke would say "logic does not
allow me" to even give it a go...

regards
Hans Wedemeyer


Fred Smith wrote:

>
> From: "Fred Smith" <imserv@...>
>
> I've been lurking & listening ;-) For those in the group, we have a Bobcad 16.1 demo on our web site. This demo is NOT an expiring demo, rather a crippled one. You cannot save files, but you can import DXF & generate limited toolpaths, including pockets and cutter radius offsets. The demo is free, and allows generation of up to 1000 lines of G-code. http://www.imsrv.com
>
> Also both Turbocad(2D) and Intellicad (an Autocad Clone, and a GOOD one) are available for down load from the internet for Free:
>
> http://turbocad.com
> http://www.cadopia.com/
>
> Both these links should be on the FAQ page as general interest for CAD only.
>
> Also most of the hobbyist/benchtop class of CNC machines come with some kind of DXF to G-code, or direct from DXF capabilities (no additional charge). MicroKinetics, Flashcut, etc.
>
> Best Regards,
>
> Fred Smith
> IMService
>
> imserv@...
> Phone: 248-486-3600 or 800-386-1670
> Fax:248-486-3698
> ----- Original Message -----
> From: beer@...
> To: CAD_CAM_EDM_DRO@onelist.com
> Sent: Friday, January 28, 2000 11:34 AM
> Subject: [CAD_CAM_EDM_DRO] Re: Grizzley
>
> From: beer@...
>
> On 28 Jan, CAD_CAM_EDM_DRO@onelist.com wrote:
> > Message: 4
> > Date: Thu, 27 Jan 2000 23:49:02 -0600
> > From: hansw <hansw@...>
> > Subject: Re: Grizzly
> >
> > Can't say much about Bob'Cad... I just used Acad and convert using "Ace"
> > it works fine for me...
> >
>
> Hans;
>
> I'm just started with CNC machining. The little bit of GCode I've run,
> I've written by hand.
>
> I'm now investigating software to make this all easier. BOBCad is
> pretty cool ( a friend showed me some neat tricks ), but just a little
> pricey for a guy playing at home.
>
> It was my plan to do as you do, use AutoCAD ( which I already own and
> kinda know how to use ) and some DXF to GCode conversion program.
> However, I do have a few questions.
>
> [Non-text portions of this message have been removed]
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Save 50 percent at MotherNature.com. See site for details
> <a href=" http://clickme.onelist.com/ad/MotherNature ">Click Here</a>
>
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager