Re: [CAD_CAM_EDM_DRO] CNC Precision on a Sherline
Posted by
Brian
on 2002-09-03 20:35:37 UTC
Hi, i think its a bunch of error adding up, some softwear, some step and
some the screw. My "Z" axis should be 3200 pulse to the inch but to get that
on a dial indicator i had to set 3275, and my x,y axis should be 800 and
have set 805 to measure right on. I will see if my second computer is the
same as the first with the same machine..cul brian f.
some the screw. My "Z" axis should be 3200 pulse to the inch but to get that
on a dial indicator i had to set 3275, and my x,y axis should be 800 and
have set 805 to measure right on. I will see if my second computer is the
same as the first with the same machine..cul brian f.
----- Original Message -----
From: "mszollar" <kenargo@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, September 02, 2002 11:29 PM
Subject: [CAD_CAM_EDM_DRO] CNC Precision on a Sherline
> Question; I was calibrating my Sherline mill motor travel/backlash,
> etc for my CNC machine. When I was through I noticed that I needed
> 8080 steps per inch (x and y) and 7950 SPI for Z. Is the axis screw
> that inaccurate?
>
> I measured with a micrometer and a dial indicator; both show the
> same results.
>
> Thanks,
> Ken
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
mszollar
2002-09-02 20:29:09 UTC
CNC Precision on a Sherline
mszollar
2002-09-02 21:06:24 UTC
Re: CNC Precision on a Sherline - additional info
Jon Elson
2002-09-03 00:24:04 UTC
Re: [CAD_CAM_EDM_DRO] CNC Precision on a Sherline
Brian
2002-09-03 20:35:37 UTC
Re: [CAD_CAM_EDM_DRO] CNC Precision on a Sherline