Re: 1000 oz-in stepper sources
Posted by
doug6949
on 2002-09-21 16:25:35 UTC
I would avoid the NEMA42, 1125 oz.in. motors than Mickokinetics and Anaheim Autmation sell. These have such high detent torque that they run out of power at about 600rpm. The best I could get out of them on a knee mill was 60ipm at 75V. Real dogs.
You will get better performance with double stack NEMA34 motors.
Doug
You will get better performance with double stack NEMA34 motors.
Doug
--- In CAD_CAM_EDM_DRO@y..., "bdrmachine" <bdrmachine@h...> wrote:
> Does anyone know where to buy 900-1200 0z-in stepper motors?
>
> Thanks
> Brian
Discussion Thread
bdrmachine
2002-09-01 10:10:13 UTC
1000 oz-in stepper sources
Robert Campbell
2002-09-01 10:39:31 UTC
Re: [CAD_CAM_EDM_DRO] 1000 oz-in stepper sources
rcstickman
2002-09-01 11:28:25 UTC
Re: 1000 oz-in stepper sources
Peter
2002-09-01 20:54:26 UTC
Re: [CAD_CAM_EDM_DRO] 1000 oz-in stepper sources
JanRwl@A...
2002-09-07 21:27:46 UTC
Re: [CAD_CAM_EDM_DRO] 1000 oz-in stepper sources
turbulatordude
2002-09-08 06:55:27 UTC
Re: 1000 oz-in stepper sources
turbulatordude
2002-09-08 07:23:10 UTC
Re: 1000 oz-in stepper sources
bdrmachine
2002-09-08 07:32:23 UTC
Re: 1000 oz-in stepper sources
bdrmachine
2002-09-08 07:34:11 UTC
Re: 1000 oz-in stepper sources
rcstickman
2002-09-08 10:56:34 UTC
Re: 1000 oz-in stepper sources
doug6949
2002-09-21 16:25:35 UTC
Re: 1000 oz-in stepper sources
vrsculptor
2002-09-21 18:37:31 UTC
Re: 1000 oz-in stepper sources - 2 cents
cnc002@a...
2002-09-21 19:10:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 1000 oz-in stepper sources - 2 cents