Re: Pittman Servomotor

Assuming this is a "standard" pittman part number, you can find the
specs. according to their datasheet at:

http://www.pittmannet.com/pdf/lcm_bulletin.pdf

For example, 9X13 series:

Continuous torque - 3.2 oz-in
Stall torque - 15.6 oz-in
No load speed 5592 RPM
Kt - 4.47 oz-in/Amp
No load current - .13 Amp
Peak Current (Stall) - 3.59 Amp

The 19.1 VDC is the "reverence voltage" in the "winding data" table.

The "4" in your 9413 part number just means it has tabs instead of
leads.

Check out that datasheet...

- Tom Scarince


--- In CAD_CAM_EDM_DRO@y..., "Mike Haughton" <mikehaughton@t...>
wrote:

> I have some Pittman servos taken from a HP7475 pen plotter. Can

anybody

> supply details of these servomotors? I can't find them on the

Pittman

> website.
> Details from the motor
> 9413D319
> 3140-0665 rev H
> 19.1 VDC
> 1-7-87
> The encoder is made by HP and I would appreciate connection details

(4 lead

> AMP flat cable). The encoder wheel is mylar with two tracks.
> Many thanks in advance.
>
> MikeH