Re: [CAD_CAM_EDM_DRO] Question tuning G320 servoamps.

Any settings you come up with when the motors are bare shaft will be
meaningless when you attach them to your machine.

With the Gecko servo drives the pacing of the pulse stream is irrelevant. It
only drives an accumulator to generate an error voltage by comparing to the
output from the encoders. They could care less how evenly the pulses appear.
The larger the difference between the accumulated command pulses and the
encoder pulses the greater the error signal. The error signal then commands
the servo amp and the greater it is the harder the motors are driven.

Tim
[Denver, CO]

> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a

sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.

DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........