Re: [CAD_CAM_EDM_DRO] DeskPCB demo now available

So, Fred,

Do you also have some software that will plate the holes (PTH) after
DeskPCB drills them?

Can you point me to any resources that may be suitable for a small
hobby/prototyping PTH operation? That has always been my biggest
hesitation regarding software like DeskPCB. I have a small tank of
Ferric Chloride, an air pump and aquarium heater for the occasional
prototype but feedthru's (aka via's) have always been the main problem
with home prototyping. Sorry, I realize this is OT.

In any event, I will have a look at your software as I am a little bit
curious how it works. I wish you every success with it.

Cheers, Peter

IMService wrote:

>For those that are interested, I finally got the DeskPCB demo on the web site. Here is the URL to the info:
>
>http://www.imsrv.com/deskpcb
>
>Inputs Gerber II and Excellon files, outputs trace isolation toolpaths for milling as DXF or G-code, spot drills with router tool, and outputs drilling programs for PCB's (printed circuit boards). Can also export the Gerber geometry converted to DXF 2D files. $95.00 USD
>
>Those that had requested notices, should have already received download instructions via e-mail.
>
>
>Best Regards, Fred Smith- IMService
>
>Listserve Special discounts and offers are at:
>http://www.imsrv.com/grp.html
>
>We are THE source for low cost Cad Cam
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>