CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Power Brownouts

Posted by w.higdon@a...
on 2002-10-15 10:40:30 UTC
My experience from when I worked for Entec, was that all
of the machines going out the door had a small ups in
the cabinet. The Ups powered the Controller, the
Encoders & associated circuits, and the E-stop circuitry.
Bill Higdon
My 2 Pfenig worth
> I would try to find a UPS that has some sort of output that detects a
> low line power condition. Then hook up the low line power fault to E-
> stop circuitry on your CNC software.
>
> The UPS could power your computer while you either save your work or
> wait for the power to come back on.
>
> -Erik Reikes
>
> --- In CAD_CAM_EDM_DRO@y..., "echnidna" <echnidna@y...> wrote:
> > Hi Group,
> > I live in an area where occaisional disruptions occur to the
> electricty power grid. Is there any way to protect cnc machines from
> a power failure when part way through a machining cycle. A UPS is
> practical for the computer itself but the high cost of a very large
> unit to accomodate the routers (and dust collectors) isnt practical.
> >
> > I want to prevent damage to the machine and the job in progress.
> > And hopefully be able to restart at the point where the machining
> was interupted.
> > Regards
> > Bob Thomas
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you
> have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site
> to the CCED group, as many of the same members are there, for OT subjects, that
> are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T
> POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

echnidna 2002-10-12 19:20:09 UTC Power Brownouts Jon Elson 2002-10-12 23:06:50 UTC Re: [CAD_CAM_EDM_DRO] Power Brownouts echnidna 2002-10-12 23:46:58 UTC Re: Power Brownouts Erik Reikes 2002-10-14 23:13:36 UTC Re: Power Brownouts w.higdon@a... 2002-10-15 10:40:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Brownouts