CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] opinions on this interesting stepper

on 2002-10-16 11:11:49 UTC
Hi,

Here's a translation from BabbleFish

STEPPING MOTOR make Berger Lahr. 5 phases (structure like 2 phase step
engines) pitch (HS/VS) 1000/500, stepper angles (HS/VS) 0,36°/0,72°/max.
torque 75 Ncm, retaining moment 85 Ncm, rated current/coil 1.4 A,
resistance/coil 2.3, mass: 60 Ø x 96 mm, wave 6 Ø x 18 mm, weight 1280
gram. A very strong stepping motor. Supply with data sheet!

Hope this helps
-----Original Message-----
From: Graham Stabler [mailto:eexgs@...]
Sent: Wednesday, October 16, 2002 1:38 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] opinions on this interesting stepper


http://www.lemo-solar.de/

Click Sonderposten the motor is top right and appears to be 500 step?

Any opinions??

Cheers,

Graham


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

Graham Stabler 2002-10-16 10:38:04 UTC opinions on this interesting stepper Malcolm Kynoch 2002-10-16 11:11:49 UTC RE: [CAD_CAM_EDM_DRO] opinions on this interesting stepper William Scalione 2002-10-16 16:24:28 UTC Re: [CAD_CAM_EDM_DRO] opinions on this interesting stepper Tony Jeffree 2002-10-17 00:15:21 UTC Re: opinions on this interesting stepper