Re: Increasing DRO resolution
Posted by
mayfieldtm
on 2002-10-21 08:39:34 UTC
Paul:
There are "Interpolator" units available that can increase the
resolution of encoders and linear scales.
These are electronic and usually available in 2,5 and 10 times the
encoder resolution.
The catch is that the quadrature signal output of your encoder must
be a sine wave, not a digital output. Most encoders use one or the
other and sometimes both.
The sine wave output can come in a verity of levels, so the
interpolator must match.
Of course the quality of your encoder and mechanical connection must
be appropriate.
One more note: The Output of most of the Interpolators is digital. So
your DRO must accept this.
I have seen 10x setups that were quite accurate.
Tom M.
There are "Interpolator" units available that can increase the
resolution of encoders and linear scales.
These are electronic and usually available in 2,5 and 10 times the
encoder resolution.
The catch is that the quadrature signal output of your encoder must
be a sine wave, not a digital output. Most encoders use one or the
other and sometimes both.
The sine wave output can come in a verity of levels, so the
interpolator must match.
Of course the quality of your encoder and mechanical connection must
be appropriate.
One more note: The Output of most of the Interpolators is digital. So
your DRO must accept this.
I have seen 10x setups that were quite accurate.
Tom M.
Discussion Thread
paul_norton2001
2002-10-20 03:57:05 UTC
Increasing DRO resolution
w.higdon@a...
2002-10-20 08:25:25 UTC
Re: [CAD_CAM_EDM_DRO] Increasing DRO resolution
Jon Elson
2002-10-20 21:25:40 UTC
Re: [CAD_CAM_EDM_DRO] Increasing DRO resolution
mayfieldtm
2002-10-21 08:39:34 UTC
Re: Increasing DRO resolution