Re: [CAD_CAM_EDM_DRO] MSc Degree in Mech. Eng.

Is it available for a general public?
Alex

----- Original Message -----
From: Semih Diken <sdiken@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 22, 2002 10:44 AM
Subject: [CAD_CAM_EDM_DRO] MSc Degree in Mech. Eng.


> Finally I am graduated, thank you for all...
>
> ABSTRACT
>
> CONVERSION OF A CONVENTIONAL LATHE TO A NUMERICALLY CONTROLLED FORM
> BY USING A COMPUTER BASED MOTION CONTROL UNIT
>
> DÝKEN, Semih
> Ms. in Mechanical Engineering
> University of Gaziantep
> Supervisor: Prof. Dr. Cengiz DOGAN
> September 2002, 87 Pages
>
> The aim of this study is to convert a conventional lathe to numerical
> control by using a computer based motion control unit. Main theme of
> this is to obtain the movement of stepper motor system with lead
> screw, which is moved by given commands through the computer in
> certain limits. To obtain this action the movement of machine tools
> is taken as the model. The shaft with lead screw is beared at two
> ends by ball bearing. To drive the system, two stepper motors are
> used. Four-axis stepper motor driver used to drive the motors by
> sending pulses is fed with a transformer. Stepper motors have been
> controlled from PC parallel port by a software program, written in
> Turbo Pascal. It is not used any interface control card between
> motors driver and computer. It reduced the cost of the system.
>
>
> Keywords: Stepper motor, Computer Numerical Control, Electromechanic,
> Motion Control Systems.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>