Re: [CAD_CAM_EDM_DRO] MSc Degree in Mech. Eng.

Congrats! good luck! cul brian f.

----- Original Message -----
From: "Semih Diken" <sdiken@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, October 22, 2002 10:44 AM
Subject: [CAD_CAM_EDM_DRO] MSc Degree in Mech. Eng.


Finally I am graduated, thank you for all...

ABSTRACT

CONVERSION OF A CONVENTIONAL LATHE TO A NUMERICALLY CONTROLLED FORM
BY USING A COMPUTER BASED MOTION CONTROL UNIT

DÝKEN, Semih
Ms. in Mechanical Engineering
University of Gaziantep
Supervisor: Prof. Dr. Cengiz DOGAN
September 2002, 87 Pages

The aim of this study is to convert a conventional lathe to numerical
control by using a computer based motion control unit. Main theme of
this is to obtain the movement of stepper motor system with lead
screw, which is moved by given commands through the computer in
certain limits. To obtain this action the movement of machine tools
is taken as the model. The shaft with lead screw is beared at two
ends by ball bearing. To drive the system, two stepper motors are
used. Four-axis stepper motor driver used to drive the motors by
sending pulses is fed with a transformer. Stepper motors have been
controlled from PC parallel port by a software program, written in
Turbo Pascal. It is not used any interface control card between
motors driver and computer. It reduced the cost of the system.


Keywords: Stepper motor, Computer Numerical Control, Electromechanic,
Motion Control Systems.



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/