Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Posted by
Jerry Kimberlin
on 2002-10-23 17:10:15 UTC
jagco1998 wrote:
sometimes, but resistors don't so far as I know.
JerryK
>I didn't know resistors were polarized? Capacitors have a +-
> I bought a large lot of 1/4w 5% resistors and need to know which
> side is + so I can connect it correctly to a G201.
> They are 82k. The bands are in this order...
> grey,red,orange,gold.
> ANy clarification on this would be greatly appreciated.
sometimes, but resistors don't so far as I know.
JerryK
Discussion Thread
jagco1998
2002-10-23 17:01:59 UTC
which way resistor goes for current setting on Geckos??
Jerry Kimberlin
2002-10-23 17:10:15 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Alan Marconett KM6VV
2002-10-23 17:17:31 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Raymond Heckert
2002-10-23 18:42:59 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Robert Campbell
2002-10-23 18:54:29 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Lloyd Leung
2002-10-23 18:59:10 UTC
RE: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Jim Brown
2002-10-23 19:11:10 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
JanRwl@A...
2002-10-23 20:19:40 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Jim Brown
2002-10-23 22:48:37 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
Alan Matheson
2002-10-23 23:52:56 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??
turbulatordude
2002-10-24 06:47:47 UTC
Re: which way resistor goes for current setting on Geckos??
Raymond Heckert
2002-10-24 20:37:36 UTC
Re: [CAD_CAM_EDM_DRO] which way resistor goes for current setting on Geckos??