CAD CAM EDM DRO - Yahoo Group Archive

Re: Chain drive

Posted by echnidna
on 2002-10-30 02:03:24 UTC
--- In CAD_CAM_EDM_DRO@y..., JanRwl@A... wrote:
> Bob:
>
> I built an X-Y Table once where chain-drive was used to connect the MOTOR to
> the X-screws, and the #35 chain gave out the first month! Connect the motor
> directly to the end of the screw, using a proper shaft-coupler that permits
> SOME a-axial or antiparallel human-frailty.
>
>
Jan,
i am going to use chain instead of leadscrew or rack and pinion. most likely in conjunction with cable to reduce inerta loads

Bob

Discussion Thread

echnidna 2002-10-29 21:59:43 UTC Chain drive JanRwl@A... 2002-10-29 23:40:27 UTC Re: [CAD_CAM_EDM_DRO] Chain drive echnidna 2002-10-30 02:03:24 UTC Re: Chain drive Tony Jeffree 2002-10-30 05:31:50 UTC Re: Chain drive