RE: New Program for Monitorng LPT ports
Posted by
Paul Devey
on 2000-02-06 16:07:02 UTC
Hans,
Thank you.
I will keep the list up to date on my experience.
Paul Devey
-----Original Message-----
From: hansw [SMTP:hansw@...]
Sent: Sunday, February 06, 2000 2:18 AM
To: cad
Subject: [CAD_CAM_EDM_DRO]New Program for Monitorng LPT ports
From: hansw <hansw@...>
If anyone is interested I just finished my LPT_SPY.exe it is a DOS TSR
when loaded will
monitor the complete status of a printer port. I made it CNC oriented,
that is to say the display
is not in normal HEX, it displays each bit as a 0 or 1
Something like this
378 11001100
379 11001100
37A 11001100
where 378, 379, 37A are the port addresses and 11001100 are the data
bits, normal ordering
MSB---------LSB
I find this kind of display a lot easier to use when it comes to
debugging with a Voltmeter !
It will accept address
3BC
378
278
I wrote it in assembly and C++ , just tested it on my Pentium II and a
regular Pentium P5.
Full description at my web site. It is a tolerant TSR and unloads
gracefully.
http://home.swbell.net/hans_w/index.htm
Follow the link to the Download Page and at the button of it to the
LPT_SPY page...
Please let me know if there are any major bugs...
I tested it running CNCPro and MAXNC worked fine with both programs.
regards
Hans Wedemeyer
--------------------------- ONElist Sponsor ----------------------------
Don't buy your Valentine a Gift by clicking here.
<a href=" http://clickme.onelist.com/ad/SparksValentine11 ">Click Here</a>
------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
Thank you.
I will keep the list up to date on my experience.
Paul Devey
-----Original Message-----
From: hansw [SMTP:hansw@...]
Sent: Sunday, February 06, 2000 2:18 AM
To: cad
Subject: [CAD_CAM_EDM_DRO]New Program for Monitorng LPT ports
From: hansw <hansw@...>
If anyone is interested I just finished my LPT_SPY.exe it is a DOS TSR
when loaded will
monitor the complete status of a printer port. I made it CNC oriented,
that is to say the display
is not in normal HEX, it displays each bit as a 0 or 1
Something like this
378 11001100
379 11001100
37A 11001100
where 378, 379, 37A are the port addresses and 11001100 are the data
bits, normal ordering
MSB---------LSB
I find this kind of display a lot easier to use when it comes to
debugging with a Voltmeter !
It will accept address
3BC
378
278
I wrote it in assembly and C++ , just tested it on my Pentium II and a
regular Pentium P5.
Full description at my web site. It is a tolerant TSR and unloads
gracefully.
http://home.swbell.net/hans_w/index.htm
Follow the link to the Download Page and at the button of it to the
LPT_SPY page...
Please let me know if there are any major bugs...
I tested it running CNCPro and MAXNC worked fine with both programs.
regards
Hans Wedemeyer
--------------------------- ONElist Sponsor ----------------------------
Don't buy your Valentine a Gift by clicking here.
<a href=" http://clickme.onelist.com/ad/SparksValentine11 ">Click Here</a>
------------------------------------------------------------------------
Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager
Discussion Thread
hansw
2000-02-05 23:18:06 UTC
New Program for Monitorng LPT ports
Ted Robbins
2000-02-06 07:44:41 UTC
Re: New Program for Monitorng LPT ports
Paul Devey
2000-02-06 16:07:02 UTC
RE: New Program for Monitorng LPT ports