Re: Trying to identify Bridgeport Series II CNC Tooling
Posted by
Steve Stallings
on 2002-11-13 09:05:52 UTC
Hi Tim
This is Erickson type Quick Change tooling. It is quite
common on Bridgeport CNC machines. Most likely it is the
30 taper version but a very few machines were fitted with
40 taper versions. While the taper is the same as ISO or
National Standard 30 and 40, the Quick Change has a very
specific flange diameter and thickness. Sometimes you
can modify them to work, but you should be looking for
the real thing. Common brands are Erickson (QC-30 series),
and Valenite (V30M series). They have also been made by
Kennametal, Lyndex, Command Tool and others.
Cheers,
Steve Stallings
www.pmdx.com
This is Erickson type Quick Change tooling. It is quite
common on Bridgeport CNC machines. Most likely it is the
30 taper version but a very few machines were fitted with
40 taper versions. While the taper is the same as ISO or
National Standard 30 and 40, the Quick Change has a very
specific flange diameter and thickness. Sometimes you
can modify them to work, but you should be looking for
the real thing. Common brands are Erickson (QC-30 series),
and Valenite (V30M series). They have also been made by
Kennametal, Lyndex, Command Tool and others.
Cheers,
Steve Stallings
www.pmdx.com
--- In CAD_CAM_EDM_DRO@y..., "tmartin23" <tmartin23@y...> wrote:
> I have acquired this BP CNC and I am not familiar with the tool
> holder system. Originally I thought it was Kwik-Switch 200 but upon
> seeing it up close and personal, it is quite different. If someone
> can help me identify this I would appreciate it. See pictures at:
> http://web2.airmail.net/tmartin
>
> The tool holder picture is down near the bottom of the webpage.
>
> Thanks in advance!
>
> Tim
Discussion Thread
tmartin23
2002-11-13 07:42:27 UTC
Trying to identify Bridgeport Series II CNC Tooling
motoproto
2002-11-13 07:56:49 UTC
Re: Trying to identify Bridgeport Series II CNC Tooling
Steve Stallings
2002-11-13 09:05:52 UTC
Re: Trying to identify Bridgeport Series II CNC Tooling
Tim Goldstein
2002-11-13 09:11:11 UTC
Re: [CAD_CAM_EDM_DRO] Trying to identify Bridgeport Series II CNC Tooling
tmartin23
2002-11-13 16:30:49 UTC
Re: Bridgeport Series II CNC Tooling is #30 Erickson Quick Change - Thanks!