RE: [CAD_CAM_EDM_DRO] Enco backlash
Posted by
aussiedude
on 2002-11-19 09:43:14 UTC
Yes and yes, I cnc'd an enco mill drill, used 650 ozin steppers, timing
belt pullyspulleys, tightened the backlash adj till I "felt" it getting
stiffer by hand and it workd great.
Not as good as a ball screw im sure but I can get press fit tolerances
on bearings which is all I need.
Hope this helps,
David
-----Original Message-----
From: Marv Frankel [mailto:dcdziner@...]
Sent: Tuesday, November 19, 2002 9:36 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Enco backlash
I've been following all kinds of solutions for reducing backlash in
CNC retrofits, from installing ball screws, to casting your own nuts.
I have an Enco 8 X 36 Model 100-1525 mill, and found instructions for
backlash adjustments on X-Y, on their web site. The yoke, through
which the X-Y screws pass has 2 cylindrical nuts for each screw. The
outer nuts have adjusting screws that effectively pre-load the nuts
to reduce backlash, and locking screws for maintaining the
adjustment. Has anyone been successful in using this on a CNC
machine, and how tight can you get the backlash?
Marv Frankel
Los Angeles
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
belt pullyspulleys, tightened the backlash adj till I "felt" it getting
stiffer by hand and it workd great.
Not as good as a ball screw im sure but I can get press fit tolerances
on bearings which is all I need.
Hope this helps,
David
-----Original Message-----
From: Marv Frankel [mailto:dcdziner@...]
Sent: Tuesday, November 19, 2002 9:36 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Enco backlash
I've been following all kinds of solutions for reducing backlash in
CNC retrofits, from installing ball screws, to casting your own nuts.
I have an Enco 8 X 36 Model 100-1525 mill, and found instructions for
backlash adjustments on X-Y, on their web site. The yoke, through
which the X-Y screws pass has 2 cylindrical nuts for each screw. The
outer nuts have adjusting screws that effectively pre-load the nuts
to reduce backlash, and locking screws for maintaining the
adjustment. Has anyone been successful in using this on a CNC
machine, and how tight can you get the backlash?
Marv Frankel
Los Angeles
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Discussion Thread
Marv Frankel
2002-11-19 09:35:54 UTC
Enco backlash
aussiedude
2002-11-19 09:43:14 UTC
RE: [CAD_CAM_EDM_DRO] Enco backlash