Re: [CAD_CAM_EDM_DRO] Digest Number 2738

Michael,
The primary purpose of this system is cooling, and clearing chips
is a fringe benefit. You're right about the air also acting as a coolant. If
you look through some of the machine shop equipment catalogs, you'll even
find "air only" cooling systems.

Marv Frankel

----- Original Message -----
From: "Michael Gamber" <mgamber@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, November 27, 2002 11:34 AM
Subject: Re: [CAD_CAM_EDM_DRO] Digest Number 2738


>
> So, am I correct in assuming the purpose of this is to "blow" chips off
> the tool and add a little bit of coolant/lube? But primarily blow chips
> off the tool? Also, the moving decompressed air itself is probably very
> cold, right?
>
> I have a coolmist system that I recently mounted to my CNC'd Taig and am
> working on getting it setup properly. Plan on having an AC relay
> activated by my controller box. Should be able to turn it on and off
> with the proper m codes.
>
> Ron Ginger wrote:
> >
> > >From: Jerry Kimberlin <kimberln@...>
> > >Subject: Re: Plans for a mister?
> >
> > >"C.S. Mo" wrote:
> > >
> > >> What's your experience using a mister in a smaller area?
> >
> > >I've got a Kool Mist system. It uses a lot of air and fills the
> > >atmosphere with a wet haze ..............
> >
> > The you are using way to much of it. The Bijur system Ive seen uses so
> > little fluid you have to hold your hand in front of the nozzle several
> > seconds to get even a big drop on it. Its 99% air with just a tiny bit
of
> > coolant. You rarely see any accumulation of fluid on the work piece or
tool.
> >
> > Works well, too.
> >
> > ron ginger
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>