Re: Can You Machine NURBS?
Posted by
pressgocnc <dave_pearson@b...
on 2002-12-10 08:27:37 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "mjf462001 <mjf46@j...>"
<mjf46@j...> wrote:
The latest version of Dolphin 3DCAM has the ability to output the
toolpath as Spline data. I have one post processor for doing this,
but have not actually tried it in anger.
I know that controls such as the Siemens 810/840D and the Heidenhain
426 can handle spline toolpath data. I'm sure there are many more
than this though.
I think there are subtle differences in the spline data required by
different CNC controls.
The demo version of Dolphin 3DCAM is available for download from the
links page at www.pressgo-cnc.co.uk
Dave Pearson
<mjf46@j...> wrote:
> Does anyone have a heads up on a cam program that willHi Matthew,
> post NURBS, or a machine controller that will machine NURBS?
>
> With NURBS being the the next greatest thing to happen to CNC
> machining someone here must be working with them.
>
> Matthew
The latest version of Dolphin 3DCAM has the ability to output the
toolpath as Spline data. I have one post processor for doing this,
but have not actually tried it in anger.
I know that controls such as the Siemens 810/840D and the Heidenhain
426 can handle spline toolpath data. I'm sure there are many more
than this though.
I think there are subtle differences in the spline data required by
different CNC controls.
The demo version of Dolphin 3DCAM is available for download from the
links page at www.pressgo-cnc.co.uk
Dave Pearson
Discussion Thread
mjf462001 <mjf46@j...
2002-12-10 07:10:20 UTC
Can You Machine NURBS?
pressgocnc <dave_pearson@b...
2002-12-10 08:27:37 UTC
Re: Can You Machine NURBS?
JanRwl@A...
2002-12-10 20:52:30 UTC
Re: [CAD_CAM_EDM_DRO] Can You Machine NURBS?
mjf462001 <mjf46@j...
2002-12-10 22:14:39 UTC
Re: Can You Machine NURBS?
JanRwl@A...
2002-12-10 22:31:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Can You Machine NURBS?
rainnea <rainnea@b...
2002-12-11 03:24:49 UTC
Re: Can You Machine NURBS?
Carol & Jerry Jankura
2002-12-11 05:05:42 UTC
RE: [CAD_CAM_EDM_DRO] Re: Can You Machine NURBS?
mjf462001 <mjf46@j...
2002-12-11 08:45:46 UTC
Re: Can You Machine NURBS?
Jon Elson
2002-12-11 09:57:45 UTC
Re: [CAD_CAM_EDM_DRO] Can You Machine NURBS?
Alan Marconett KM6VV
2002-12-11 10:55:06 UTC
Re: Can You Machine NURBS?
mjf462001 <mjf46@j...
2002-12-11 11:19:35 UTC
Re: Can You Machine NURBS?
pressgocnc <dave_pearson@b...
2002-12-11 11:46:01 UTC
Re: Can You Machine NURBS?
rainnea <rainnea@b...
2002-12-11 14:06:32 UTC
Re: Can You Machine NURBS?
Alan Marconett KM6VV
2002-12-11 19:16:35 UTC
Re: Can You Machine NURBS?
JanRwl@A...
2002-12-11 19:38:54 UTC
Re: [CAD_CAM_EDM_DRO] Can You Machine NURBS?
pressgocnc <dave_pearson@b...
2002-12-12 00:48:40 UTC
Re: Can You Machine NURBS?
Mike Rainone
2002-12-13 14:11:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Can You Machine NURBS?