CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: running emc in mm units

Posted by Ray Henry
on 2002-12-23 17:09:46 UTC
>    From: Babar <riet91@...>
> Subject: Re: running emc in mm units
>
> Thanks Ray
> I did exactly as you told and it worked without
> requiring me to retune any axis
> thanks and best regards
> babar

Glad that EMC is working for you. Perseverance pays off again.

Ray

Discussion Thread

Babar 2002-12-20 09:43:31 UTC Re: running emc in mm units Ray Henry 2002-12-23 17:09:46 UTC Re: Re: running emc in mm units Babar 2002-12-24 13:49:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: running emc in mm units Babar 2002-12-24 14:03:21 UTC Params saving problem Babar 2002-12-25 21:47:36 UTC Re: Params saving problem