Re: [CAD_CAM_EDM_DRO] Re: Biggie size that Capacitor.?

A 75V cap sounds way too close for comfort with a 68V supply. You should be
using 100V rated caps for that supply voltage.

Regards,
Tony

At 14:52 14/01/2003 +0000, you wrote:

>Hi Jerry,
>
>
>noting wrong with oversizing the cap. you only use what is needed.
>
>the voltage is close, I'll let someone with more experiance offer
>some comments on that.
>
>DAve
>
>
>
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "fozzyber <jerry@o...>"
><jerry@o...> wrote:
> > Is there any thing nwrong with useing a capacitor larger than what
>is
> > needed by the powere supply. I plan on running a 68V 8-10 amp Power
> > Supply. so I should use a 12000uF/100v capacitor.
> > Last night I was given an old large line printer. After tearing it
> > down I found a few large caps, One was a 75V 24000uF cap. Is their
> > any thing wrong with useing it verses useing a 12000uF/100v?
> >
> > Thanks
> > Jerry
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Regards,
Tony