RE: [CAD_CAM_EDM_DRO] slaving axis's

If using step and direction signals you can simply link same signal to
both motor drivers or in some programs (mack 1) etc you can set it up
that way. Make sure both motors are matched etc and that you are not
skipping steps on either motor.

-----Original Message-----
From: Dave Lantz [mailto:dlantz@...]
Sent: Thursday, January 16, 2003 10:22 AM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] slaving axis's


sorry for the confusion, Im asking about both steppers AND servos at
this point. Software would probably be EMC. Im looking for a hardware
solution at this point...---Dave L.

-----Original Message-----
From: Tim Goldstein [mailto:timg@...]
Sent: Thursday, January 16, 2003 1:20 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] slaving axis's


I am a little confused how you are set up?? You mention ±10v which would
indicate you are using traditional servos, but you also mention
step/direction. If you are using step and direction type drives (like
Gecko G320/340 or steppers) you can do axis slaving in the software with
Mach1.

Tim
[Denver, CO]
Sherline products at Deep Discount
Mach1 & DeskCNC with Credit Card ordering www.KTMarketing.com/Sherline
www.KTMarketing.com/DeskCNC

----- Original Message -----

hello all in CNC land, wondering how i might be able to slave axis
together on a machine. specifically on a gantry style with motors on
both sides. Can the ±10v (for servo) be spliced together before the
servo amps, and the step-direction wires be spliced, or is the amperage
not enough?? how do they do it in the industry? encoder off the first
axis driving the second?--Dave L.

Addresses:
FAQ: http://www.ktmarketing.com/faq.html



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble. http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/