RE: [CAD_CAM_EDM_DRO] no y axis
Posted by
Dan Mauch
on 2003-01-17 09:14:24 UTC
I have heard that the program on Tim's web site had this problem and
wghen they got the correct version it worked.
Dan
-----Original Message-----
From: hexbolt1234 <hexbolt1234@...> [mailto:hexbolt1234@...]
Sent: Thursday, January 16, 2003 5:30 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] no y axis
Hi all
I have been reading all the messages I can, but have hit a snag
I have made the dro card that tom & dan have worked on, and it worked
real well until last week, it would not read the y axis
all others will work. so I made another card and installed it in
my 386 computer on the mill no luck. so I put it on a 486 computer
still no y axis reading. I don't know what made me do it, but I put
the 3.5 floppy disk in and ran the file txt_dro.exe, and it will work.
but not from the hard-drive, only from the 3.5 floppy. has anyone had
this problem before Thanks for any help
Jim (hexbolt)
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
wghen they got the correct version it worked.
Dan
-----Original Message-----
From: hexbolt1234 <hexbolt1234@...> [mailto:hexbolt1234@...]
Sent: Thursday, January 16, 2003 5:30 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] no y axis
Hi all
I have been reading all the messages I can, but have hit a snag
I have made the dro card that tom & dan have worked on, and it worked
real well until last week, it would not read the y axis
all others will work. so I made another card and installed it in
my 386 computer on the mill no luck. so I put it on a 486 computer
still no y axis reading. I don't know what made me do it, but I put
the 3.5 floppy disk in and ran the file txt_dro.exe, and it will work.
but not from the hard-drive, only from the 3.5 floppy. has anyone had
this problem before Thanks for any help
Jim (hexbolt)
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Discussion Thread
hexbolt1234 <hexbolt1234@y...
2003-01-16 22:34:50 UTC
no y axis
Dan Mauch
2003-01-17 09:14:24 UTC
RE: [CAD_CAM_EDM_DRO] no y axis
Tim Goldstein
2003-01-17 09:27:34 UTC
RE: [CAD_CAM_EDM_DRO] no y axis