Stepper Motor (was: Harrison Lathe and Gecko's)
Posted by
James Owens
on 2003-02-07 18:42:56 UTC
Hi,
I want to check my Z axis stepper motor. Is it wise to do the insulation
test with a mega?
The resistance readings are 0.4 ohms across either pair of wires, there are
four coming out of the motor. Which is twice what the manufacturer quotes
for a single coil, so they must be wired in series inside?
Regards,
Terry
I want to check my Z axis stepper motor. Is it wise to do the insulation
test with a mega?
The resistance readings are 0.4 ohms across either pair of wires, there are
four coming out of the motor. Which is twice what the manufacturer quotes
for a single coil, so they must be wired in series inside?
Regards,
Terry
Discussion Thread
James Owens
2003-02-07 18:42:56 UTC
Stepper Motor (was: Harrison Lathe and Gecko's)
JanRwl@A...
2003-02-07 19:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Stepper Motor (was: Harrison Lathe and Gecko's)
Hans Wedemeyer
2003-02-07 19:42:44 UTC
Re: [CAD_CAM_EDM_DRO] Stepper Motor (was: Harrison Lathe and Gecko's)
JanRwl@A...
2003-02-07 20:20:09 UTC
Re: [CAD_CAM_EDM_DRO] Stepper Motor (was: Harrison Lathe and Gecko's)
James Owens
2003-02-08 05:42:04 UTC
Re: [CAD_CAM_EDM_DRO] Stepper Motor (was: Harrison Lathe and Gecko's)
Bernard R <bwjarandall@c...
2003-02-08 06:05:47 UTC
Re: Stepper Motor (was: Harrison Lathe and Gecko's)
JanRwl@A...
2003-02-08 14:29:20 UTC
Re: [CAD_CAM_EDM_DRO] Stepper Motor (was: Harrison Lathe and Gecko's)
Jon Elson
2003-02-08 22:44:18 UTC
Re: [CAD_CAM_EDM_DRO] Stepper Motor (was: Harrison Lathe and Gecko's)
Jon Elson
2003-02-08 22:48:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Stepper Motor (was: Harrison Lathe and Gecko's)
Bernard R <bwjarandall@c...
2003-02-09 08:10:38 UTC
Re: Stepper Motor (was: Harrison Lathe and Gecko's)