RE: [CAD_CAM_EDM_DRO] Xylotex Stepper Drive

After building some stepper driver boards of my own, I don't know how you
can charge what you are, I have a job to get the components for that!
charge more, and go on holiday!


-----Original Message-----
From: jeffalanp <xylotex@...> [mailto:xylotex@...]
Sent: Tuesday, February 11, 2003 8:47 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Xylotex Stepper Drive


11-Feb-03

Hello CCED Members,

When I originally introduced the Xylotex XS-3525/8S-3, Three axis
35 Volt (Max.), 2.5 Amp/Phase (Max.) Bipolar Microstepping drive, the
board came without silkscreen or soldermask (which it now has), and
sold for and introductory price of $85.00. I have had good response,
especially from members of this group. Needs necessitate the raising
of the price to help cover costs. The price will increased to
$100.00 on March 1st. I believe the drive will still be an excellent
value at that price (I believe it could have a retail price of
$130.00), and fills a need at the lower amperage/voltage stepper
motor driver range. Those of you who have been contemplating a
purchase, can still get the drive for the low price of $85.00 until
the end of this month. After that, as mentioned, the price will go
to $100.00 per unit. Similarly, the price of the single axis drive
will go from $30.00 to $35.00.

Any questions or comments can be directed to me (off-list) via e-
mail at:
xylotex @ hotmail.com (remove the spaces around the @)

Again, thanks for your patronage,

Jeff
http://www.xylotex.com



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/