Re: [CAD_CAM_EDM_DRO] THK Linear Bearing/Slide

So if you put a little weight on them they should slide easier?

----- Original Message -----
From: "Robert Campbell" <bob@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 12, 2003 1:31 PM
Subject: Re: [CAD_CAM_EDM_DRO] THK Linear Bearing/Slide


> Barclay,
>
> It has to do with the amount of preload. It would have larger bearings.
I
> bought a pair on ebay and they are hard to move.
>
> Bob Campbell
> ----- Original Message -----
> From: "Fusion X Studio" <fusionxstudio@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, February 12, 2003 11:13 AM
> Subject: [CAD_CAM_EDM_DRO] THK Linear Bearing/Slide
>
>
> > I have bought a couple of THK linear slide units and both are like new.
> Are
> > they supossed to slide very easily? These aren't rough, just not easy
to
> > slide. they are clean and greased. I have bought many thomson linear
> > bearings with the rods and they are smooth and easy but don't seem to be
> > tight. Have a little play in them. It seems you would rather a
smooth
> > bearing than something that is hard to slide?? Is that the way most of
> > these THK bearings should be?
> >
> > Thanks,
> >
> > Barclay
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>