RE: [CAD_CAM_EDM_DRO] Power Supplies for Geckos

John,
I have Gecko 210s also. I used the transformer from 36v battery chargers. It
outputs 62vdc full rectified no load 25Amps. Way overkill on amps. The
transformer will never be overloaded. I have a few of those left, used if
you are interested (contact me off list) or just check the junkyards.
You should be able to make one for a lot less.

Derek B.
http://groups.yahoo.com/group/Denver_CNC_Club/

>
> Hello,
> I am upgrading my BOSS 3 with 210 Geckos.
> I plan to use the origional steppers.
> The power supply is messed up. (I replaced all the bridge rectifiers
> but to no avail.)
> I was looking for power supplies but am not sure what to get.
> I found some 65 V 15 Amp from TTI for $300 ea.
> Any other suggestions?
> Thanks,
> John
>
>
>
>