Re: Lathe steppers
Posted by
turbulatordude <davemucha@j...
on 2003-02-15 20:15:29 UTC
Hi John,
The best place to start is at post 45509, and read the thread.
how much power is needed to move the carrage ?
how efficient is the screw ?
then ratio of belts/gears/leadscrew?
Dave
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "johncrad <John.Craddock@x>"
<John.Craddock@x> wrote:
The best place to start is at post 45509, and read the thread.
how much power is needed to move the carrage ?
how efficient is the screw ?
then ratio of belts/gears/leadscrew?
Dave
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "johncrad <John.Craddock@x>"
<John.Craddock@x> wrote:
> I have a 11" * 24" Taiwanese screw cutting lathe with power crosstpi.
> feed. Cross feed lead screw is 8 tpi and longitudinal feed is 5
> I wish to add stepper cnc feed to it without changing to ballscrews
> etc. What size steppers would the group recommend? It is hobby use
> machine.
> Thanks in anticipation,
> Regards
> John Craddock
Discussion Thread
johncrad <John.Craddock@x...
2003-02-15 14:50:53 UTC
Lathe steppers
turbulatordude <davemucha@j...
2003-02-15 20:15:29 UTC
Re: Lathe steppers