Old dc motor
Posted by
geertdepecker <geert.de.pecker@s...
on 2003-02-15 20:33:55 UTC
Hi list,
I received a couple of motors from an old plotter which I would
like to use as servo's on a sherline mill/lathe. The motors have
an optical encoder attached to them (1000 cnts/rev). I was able
to find info about the encoders (they are HEDS-9000), but can't
find any info about the motors themselves.
They are from Hansen Mfg. Co. Inc. (from Princeton) and are
marked 151-26-1 with a datestamp (I think it is a datestamp)
9006.
Is there anybody in this list who could point me in the right
direction to find info? I also mailed the company for some info,
but as they seem quite old motors...
Regards,
Geert
I received a couple of motors from an old plotter which I would
like to use as servo's on a sherline mill/lathe. The motors have
an optical encoder attached to them (1000 cnts/rev). I was able
to find info about the encoders (they are HEDS-9000), but can't
find any info about the motors themselves.
They are from Hansen Mfg. Co. Inc. (from Princeton) and are
marked 151-26-1 with a datestamp (I think it is a datestamp)
9006.
Is there anybody in this list who could point me in the right
direction to find info? I also mailed the company for some info,
but as they seem quite old motors...
Regards,
Geert