Re: Need help with US Digital differential driver selection
Posted by
Bernard R <bwjarandall@c...
on 2003-02-16 12:21:06 UTC
Hi Derek,
I've just changed to the EA-D8/R8 combination after being plagued
with intermittant glitches. The new drivers have completely
eliminated the old problems. (My original cables were shielded CAT 5
cables grounded at the controller end.) My longest cable is only
10', there is no measurable voltage drop at the encoder end. I like
the modular cable connectors as they are so easy to come by, or make
yourself. Unless you need the high voltage option, I don't see the
need to go to the EA-D10/R10 drivers, as you know its the same
electronics just double the ground and + wires.
Bernard
I've just changed to the EA-D8/R8 combination after being plagued
with intermittant glitches. The new drivers have completely
eliminated the old problems. (My original cables were shielded CAT 5
cables grounded at the controller end.) My longest cable is only
10', there is no measurable voltage drop at the encoder end. I like
the modular cable connectors as they are so easy to come by, or make
yourself. Unless you need the high voltage option, I don't see the
need to go to the EA-D10/R10 drivers, as you know its the same
electronics just double the ground and + wires.
Bernard
> Need help with US Digital differential driver selection
>
> Hi
> US Digital has two models of differential driver/receivers. One is
> a 8 pin and one is a 10 pin. The 10 pin has a double ground and
> double power. The 8 pin has single ground and single power. Can
> anyone tell me which would be a better selection? I'm using the E2
> encoders with 500 cpr disks. And my longest cable length is 20'.
>
> Thanks
> Derek
Discussion Thread
tig415 <tig416@e...
2003-02-16 09:01:55 UTC
Need help with US Digital differential driver selection
Bernard R <bwjarandall@c...
2003-02-16 12:21:06 UTC
Re: Need help with US Digital differential driver selection
Jon Elson
2003-02-16 15:25:58 UTC
Re: [CAD_CAM_EDM_DRO] Need help with US Digital differential driver selection
Hans Wedemeyer
2003-02-17 06:21:58 UTC
Re: [CAD_CAM_EDM_DRO] Need help with US Digital differential driver selection
tig415 <tig416@e...
2003-02-17 08:00:12 UTC
US Digital differential driver selection heres More Info
Hans Wedemeyer
2003-02-17 08:27:59 UTC
Re: [CAD_CAM_EDM_DRO] US Digital differential driver selection heres More Info
dakota8833 <dakota8833@b...
2003-02-17 19:08:24 UTC
Re: US Digital differential driver selection heres More Info