RE: [CAD_CAM_EDM_DRO] Laptops

I have seen quite a few problem using laptops with Gecko's because a
lot of them will only put out 3.2V on the parallel port. Marriss
repeatedly insists that you have at least 4.2V on the step and direction
lines and 5VDC is better.
Use a destop PC and save your self a lot of problems.
Dan


-----Original Message-----
From: wanliker@... [mailto:wanliker@...]
Sent: Tuesday, February 18, 2003 11:51 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Laptops


I want to get a laptop suitable for TurboCNC, and then later to use with
Mach
1 or its replacement, anyone have advice as to what I sould look for on
Ebay????????? I will be using Geckpo 320'sas my drives.
I am finally getting my Emco Compact 5 lathe close to
running..................List Mom is the slowest of alllll............

Thanks for any advice.
bill

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/