RE: How hot is too hot?
Posted by
Lloyd Leung
on 2003-02-24 09:51:01 UTC
I've read on this list, that some run theirs hot enough to hold, but you
wouldn't want to hold it there. I think that would be a good limit to stay.
So hot that you can't touch would be a bad thing.
After about 1 hour, 15 minute cycles. My motors are very warm, warm enough
to not want to keep my hand there, but not enough to burn me. They are Nema
34's at 42 volts 2.5 amps.
Cheers.
-----Original Message-----
From: washcomp <jeff@...> [mailto:jeff@...]
Sent: February 24, 2003 11:59 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: How hot is too hot?
I've increased the voltage on the power supply feeding my NEMA 42
steppers to about 67 volts DC which is well under the 25 X voltage
limit. I've been warned that at too high a voltage the motors get
hot enough to fry eggs (a quantitative measurement, but one thats
hard for me to test without a pan.
After about 2 1/2 hours of locked rotor testing the motor is pretty
warm towards hot, but I can keep my hand on it without discomfort.
Should I be satisfied or concerned?
Regards,
Jeff
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
wouldn't want to hold it there. I think that would be a good limit to stay.
So hot that you can't touch would be a bad thing.
After about 1 hour, 15 minute cycles. My motors are very warm, warm enough
to not want to keep my hand there, but not enough to burn me. They are Nema
34's at 42 volts 2.5 amps.
Cheers.
-----Original Message-----
From: washcomp <jeff@...> [mailto:jeff@...]
Sent: February 24, 2003 11:59 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: How hot is too hot?
I've increased the voltage on the power supply feeding my NEMA 42
steppers to about 67 volts DC which is well under the 25 X voltage
limit. I've been warned that at too high a voltage the motors get
hot enough to fry eggs (a quantitative measurement, but one thats
hard for me to test without a pan.
After about 2 1/2 hours of locked rotor testing the motor is pretty
warm towards hot, but I can keep my hand on it without discomfort.
Should I be satisfied or concerned?
Regards,
Jeff
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
washcomp <jeff@w...
2003-02-24 09:03:31 UTC
How hot is too hot?
Lloyd Leung
2003-02-24 09:51:01 UTC
RE: How hot is too hot?
turbulatordude <davemucha@j...
2003-02-24 10:18:01 UTC
Re: How hot is too hot?
Jeff Goldberg
2003-02-24 10:23:47 UTC
RE: [CAD_CAM_EDM_DRO] Re: How hot is too hot?
Jon Elson
2003-02-24 10:40:35 UTC
Re: [CAD_CAM_EDM_DRO] How hot is too hot?
Raymond Heckert
2003-02-24 18:42:48 UTC
Re: [CAD_CAM_EDM_DRO] How hot is too hot?