CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Hexapod???

on 2003-03-07 13:40:34 UTC
Sheldon,

I have one which I use for wood carving and aluminum milling. I'm building
the next one, intended to be stiffer and faster -- I expect to be able to
machine steel with it as well.

-- Carl

cmm@...

At 12:12 AM 3/7/2003 +0000, ddgman2001 wrote:
>How far along is the Hexapod design? It seems like there are a few
>in the prototype stages but nothing more than that. What kind of
>post processor do they require? Are they practical for 3D carving
>with a larger router?
>
>
>Thanks in advance.
>
>Sheldon
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

ddgman2001 2003-03-06 16:12:25 UTC Hexapod??? dakota8833 2003-03-07 12:33:15 UTC Re: Hexapod??? Carl Mikkelsen 2003-03-07 13:40:34 UTC Re: [CAD_CAM_EDM_DRO] Hexapod??? Carl Mikkelsen 2003-03-07 13:44:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Hexapod??? Sheldon Dingwall 2003-03-07 13:51:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Hexapod??? George Erhart 2003-03-07 14:18:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Hexapod??? Monte Westlund 2003-03-07 17:35:29 UTC Re: Hexapod???