Gecko Auto Current Reduction PROBLEMS

When I removed the jumper to Disable Auto Current Reduction(ACR) on this G201, it changed the response completely !
Yesterday WITH ACR the unit ran fine, today WITHOUT ACR it stalls. !
I thought the ACR should not influence the normal workings of the G201
What am I missing here....
Hans W


Mariss Freimanis wrote:

> Hans,
>
> Unfortunately no. That is a factory setting.
>
> Mariss
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Hans Wedemeyer <xyz@h...>
> wrote:
> > Is it possible to increase the time before the Gecko G201 goes into
> Auto Current Reduction ?
> >
> > I would like to increase the time from 1 second to perhaps 4
> seconds.
> >
> > Best Regards
> > Hans W
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/