Post Processor for Visual Mill 3.0
Posted by
Andrew Werby
on 2003-03-24 09:34:59 UTC
Message: 6
Date: Mon, 24 Mar 2003 13:59:06 -0000
From: "keithsloan" <keith.sloan@...>
Subject: Post Processor for Visual Mill 3.0
Which is the best Post Processor to choose for Visual Mill 3.0
when the controller will be.
1) Master5
2) EMC
[ EMC follows the Allen-Bradley conventions, so try "allenb1" for that.
Master5 will probably be happiest with "fanuc1".]
Andrew Werby
www.computersculpture.com
Date: Mon, 24 Mar 2003 13:59:06 -0000
From: "keithsloan" <keith.sloan@...>
Subject: Post Processor for Visual Mill 3.0
Which is the best Post Processor to choose for Visual Mill 3.0
when the controller will be.
1) Master5
2) EMC
[ EMC follows the Allen-Bradley conventions, so try "allenb1" for that.
Master5 will probably be happiest with "fanuc1".]
Andrew Werby
www.computersculpture.com
Discussion Thread
keithsloan
2003-03-24 05:59:08 UTC
Post Processor for Visual Mill 3.0
Tim Goldstein
2003-03-24 07:56:22 UTC
RE: [CAD_CAM_EDM_DRO] Post Processor for Visual Mill 3.0
Andrew Werby
2003-03-24 09:34:59 UTC
Post Processor for Visual Mill 3.0