Re: posting

These 2 companys listed below offer products that will
make your job more easy, if you got the bucks,

http://www.computerconversions.com/
http://www.controlsciences.com/index.html

Steve

----------
From: PCSHAPER@...
To: CAD_CAM_EDM_DRO@onelist.com
Subject: [CAD_CAM_EDM_DRO] posting
Date: Saturday, February 26, 2000 11:05 PM

From: PCSHAPER@...

To anyone who cares to respond,

I have a Shasuka (sp?) vertical mill with an old Summit-Bandit controller.
Needless to say, it is costing me a fortune to keep it working! This
particular
mill has servo motors and resolver position sensors. The Servo board is
working
OK, but something else is messed up. I am trying to locate someone who
knows
an inexpensive PC based 3 axis servo control board that can work with
resolvers.
I also would like to know if anyone has a schematic of the resolver board
(2
boards
bolted together) and any programming information on this board. I am an
electronics
engineer and am interested in making an interface between the PC bus and
this
card
so that I can control the machine directly from a PC.

Anyone have any help ?

Barry W.


------------------------------------------------------------------------
Start your own free email group on eGroups.
http://click.egroups.com/1/1882/2/_/423600/_/951635162/
------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager