CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Dyna 2400 Mill

Posted by fortino
on 2003-04-08 04:22:33 UTC
Marty,

I do have a Dyna 2800. I think it has simiar controller.
when the controller show READY?, you push YES. Then
the machine should initialize the home position for X, Y, Z. If push NO,
then the machine will move on emergency move. You select an axis ( X, Y, or
Z), then you can move the axis that you selected.

If any axis wouldn't move, then you have a broken controller. I had this
problem before, and didn't use the original controller anymore. Happier with
PC based contoller.

Hope, this would help.

Fortino
----- Original Message -----
From: "Marty Escarcega" <escarcega@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, April 08, 2003 11:00 AM
Subject: [CAD_CAM_EDM_DRO] Dyna 2400 Mill


> I've run across one of these benchtop mills 3 axis stepper. Has its
> control. When I power it up it says READY? on the display. Touching
> the keypad does nothing, the machine doesn't home. Control keypad
> appears to be a touch pad? Anyone have one of these or has run into a
> similar problem?
>
> Thanks in advance.
> Marty
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Marty Escarcega 2003-04-07 21:01:10 UTC Dyna 2400 Mill fortino 2003-04-08 04:22:33 UTC Re: [CAD_CAM_EDM_DRO] Dyna 2400 Mill Dan Mauch 2003-04-08 07:22:06 UTC RE: [CAD_CAM_EDM_DRO] Dyna 2400 Mill jeff_birt2000 2003-09-30 10:40:36 UTC Dyna 2400 Mill