Mill Video.... Was Dirty Little Secret...
Posted by
Vince Negrete
on 2003-04-30 07:47:00 UTC
Pretty cool video. Do you have a larger format version? Say 100 megs or so?
Cant see the thing at all and am curious if mine will sound the same when
operating. If so I wouldnt be able to do any midnight engineering without
waking the entire neighborhood. <ggg>
If its the sound of the motors braking that I'm hearing, would it be
possible to adjust gain and damp to soften the motor braking without
sacrificing accuracy?
Vince
Cant see the thing at all and am curious if mine will sound the same when
operating. If so I wouldnt be able to do any midnight engineering without
waking the entire neighborhood. <ggg>
If its the sound of the motors braking that I'm hearing, would it be
possible to adjust gain and damp to soften the motor braking without
sacrificing accuracy?
Vince
----- Original Message -----
From: "deanc500" <deancouillard@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, April 30, 2003 6:23 AM
Subject: [CAD_CAM_EDM_DRO] Re: Dirty Little Secrets (response) - solved
> This is not an issue for me any more. My noise problems are gone. I
> used a .1uF cap between err/res and enc-, and I added 100ohm resisters
> in series with the err/res lines before I tied them together (as per
> manufacturers suggestion). Problem solved. My mill is now up to 100ipm
> and runs great. I have a 20mb avi movie for those with faster modems here
> http://www.axxustech.com/movies/millvideo.AVI
>
> Can we please put this to rest and end this inappropriate thread.
> Dean
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>