Re: [CAD_CAM_EDM_DRO] New file uploaded to CAD_CAM_EDM_DRO
Posted by
Harvey White
on 2003-05-23 10:20:36 UTC
On 23 May 2003 16:41:38 -0000, you wrote:
the table.
The original design (and intention) was to prevent this by having
another bearing at 90 degrees from the one shown here, that would ride
on the bottom of the rail. This necessitated making the rail either
of an angle or a piece of square tubing.
The idea of making the angles out of the MDF and placing an aluminum
rail on it as a flat was not what I had in mind, precisely, but I do
like the idea.
I absolutely would recommend that you use a good and well aligned
table saw for this, however.
Harvey
>That will work. However, there is nothing keeping it from lifting off
>Hello,
>
>This email message is a notification to let you know that
>a file has been uploaded to the Files area of the CAD_CAM_EDM_DRO
>group.
>
> File : /turret punch press/linear2.jpg
> Uploaded by : al5502 <telecomt@...>
> Description : DIY linear guide per Harvey White
>
>You can access this file at the URL
the table.
The original design (and intention) was to prevent this by having
another bearing at 90 degrees from the one shown here, that would ride
on the bottom of the rail. This necessitated making the rail either
of an angle or a piece of square tubing.
The idea of making the angles out of the MDF and placing an aluminum
rail on it as a flat was not what I had in mind, precisely, but I do
like the idea.
I absolutely would recommend that you use a good and well aligned
table saw for this, however.
Harvey
>
>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/turret%20punch%20press/linear2.jpg
>
>To learn more about file sharing for your group, please visit
>
>http://help.yahoo.com/help/us/groups/files
>
>Regards,
>
>al5502 <telecomt@...>
Discussion Thread
CAD_CAM_EDM_DRO@e...
2000-08-04 15:42:14 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-08-05 16:12:04 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-08-05 17:17:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-08-22 09:41:37 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-08-22 12:11:21 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-09-04 15:03:23 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-09-05 13:58:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-09-05 14:52:48 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-09-05 14:58:03 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-09-25 12:08:07 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-02 13:16:42 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-07 23:32:07 UTC
New file uploaded to CAD_CAM_EDM_DRO
ptengin@a...
2000-10-08 02:49:48 UTC
Re: [CAD_CAM_EDM_DRO] New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-08 10:45:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-08 22:17:34 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-09 11:52:35 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-09 20:44:22 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 01:28:36 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 01:37:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 01:45:56 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 01:56:09 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 07:44:44 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 08:04:10 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 08:14:09 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 08:26:48 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 08:38:26 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 08:51:27 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 09:10:07 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 09:13:22 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 09:21:42 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-12 09:31:40 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-26 09:05:17 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-27 10:02:34 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-27 15:45:18 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-10-31 18:34:21 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-03 13:27:20 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-06 05:44:16 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-07 23:21:42 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-08 15:22:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-08 15:22:48 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-08 15:23:11 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-11 07:53:23 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-12 05:55:49 UTC
New file uploaded to CAD_CAM_EDM_DRO
Ozzie@h...
2000-11-12 10:33:13 UTC
Re: New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-15 09:39:03 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-20 08:57:03 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-23 10:33:59 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-11-29 13:10:04 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-12-24 13:38:36 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-12-24 13:52:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2000-12-28 22:26:23 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-07 16:32:12 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-12 01:47:44 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-13 00:12:45 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-22 18:34:58 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-24 06:29:20 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-25 11:12:38 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-01-27 18:04:56 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-02-03 16:20:21 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-02-11 06:59:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-02-11 07:01:54 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-03-06 18:31:31 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-03-07 16:48:02 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-03-09 11:49:17 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-03-10 10:19:05 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-03-27 21:38:02 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-04-15 07:04:01 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-04-21 17:31:44 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@e...
2001-04-22 10:07:27 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-04-23 17:02:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
ballendo@y...
2001-04-24 03:56:21 UTC
Re: New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-04-25 09:46:52 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-16 12:42:39 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-17 21:59:22 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-21 23:21:00 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-21 23:22:50 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-22 23:20:46 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-23 19:24:45 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-23 19:28:02 UTC
New file uploaded to CAD_CAM_EDM_DRO
JanRwl@A...
2001-05-23 19:34:12 UTC
Re: [CAD_CAM_EDM_DRO] New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-23 21:00:13 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-23 22:52:09 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-05-29 10:40:46 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-06-01 18:36:13 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-06-02 13:26:59 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-06-07 08:13:32 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-06-24 18:50:41 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-06-24 18:50:52 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-06-25 05:35:44 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-07-03 20:05:03 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-07-03 20:05:23 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-07-13 17:25:23 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-07-16 01:24:31 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-07-18 12:51:34 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-12 08:43:55 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-18 01:10:16 UTC
New file uploaded to CAD_CAM_EDM_DRO
Joseph
2001-08-18 01:21:48 UTC
Re: New file uploaded to CAD_CAM_EDM_DRO
Tim Goldstein
2001-08-18 09:17:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-20 21:21:42 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-21 01:36:11 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-21 01:37:41 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-21 01:39:33 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-21 01:41:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-21 01:42:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-08-24 15:48:44 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-05 13:57:55 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-06 00:50:50 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-06 15:09:56 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-08 17:40:51 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-09 08:10:03 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-09 12:04:21 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-09-12 17:27:01 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-10-02 09:41:55 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-10-07 01:30:25 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-10-11 03:41:56 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-10-26 20:47:12 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-10-28 09:05:22 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-11-02 17:23:25 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-11-03 20:39:39 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-11-09 15:10:46 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2001-12-15 05:58:55 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-01-08 17:53:14 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-01-12 14:28:46 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-01-15 12:52:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-01-22 17:50:11 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-02-11 18:13:32 UTC
New file uploaded to CAD_CAM_EDM_DRO
Bob Bachman
2002-02-11 18:26:12 UTC
Mill/Drill Head Alignment Aid
CAD_CAM_EDM_DRO@y...
2002-02-19 15:42:25 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-03-14 09:43:13 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-03-19 20:56:50 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-03-19 21:01:14 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-04-12 05:53:22 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-04-12 06:27:42 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-04-15 18:57:20 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-05-14 22:07:22 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-05-26 13:05:06 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-06-20 11:17:25 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-07-05 05:48:28 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-07-13 19:23:48 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-05 12:44:09 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-12 16:57:40 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-12 16:58:04 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-12 16:58:18 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-12 18:12:16 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-20 20:13:55 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-20 20:30:53 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-21 04:54:28 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-22 10:23:13 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-08-23 23:58:39 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-09-01 12:17:41 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-10-11 16:56:01 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-10-22 21:44:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-11-03 22:39:43 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-11-03 22:43:08 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-11-28 14:58:03 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2002-11-28 19:41:17 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-01-07 10:36:37 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-01-31 16:46:17 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-02-08 20:11:09 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-03-11 12:02:26 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-03-11 22:27:00 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-03-14 18:58:32 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-03-15 07:44:40 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-05-07 17:09:29 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-05-16 04:19:47 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-05-20 14:34:15 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-05-23 09:43:11 UTC
New file uploaded to CAD_CAM_EDM_DRO
Harvey White
2003-05-23 10:20:36 UTC
Re: [CAD_CAM_EDM_DRO] New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-05-28 00:03:44 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-06-15 15:37:50 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-06-24 17:12:05 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-08-09 19:17:26 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-08-25 20:53:13 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-08-25 22:38:54 UTC
New file uploaded to CAD_CAM_EDM_DRO
glee@i...
2003-08-25 22:43:20 UTC
Computer Aided Machining: From concept to completed part
turbulatordude
2003-08-26 04:35:05 UTC
Re: New file uploaded to CAD_CAM_EDM_DRO
glee@i...
2003-08-26 08:33:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: New file uploaded to CAD_CAM_EDM_DRO
ccq@x...
2003-08-26 09:41:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-09-01 13:28:39 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-09-25 05:47:58 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-09-25 05:48:59 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2003-09-25 05:49:14 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2004-04-08 10:34:46 UTC
New file uploaded to CAD_CAM_EDM_DRO
CAD_CAM_EDM_DRO@y...
2004-11-24 13:37:11 UTC
New file uploaded to CAD_CAM_EDM_DRO