Re: [CAD_CAM_EDM_DRO] EMC Video card hunt.
Posted by
Markwayne
on 2003-05-27 12:20:05 UTC
The short answer, a lot of them. Here's the consideration's. You dont
need a fancy card and if you have to stick to PCI your choices are
limited any way. What I know works are the early ATI's Mach 64 based,
Rage and RageII+ and their varations. A comprehensive list of all
xfree86 supported cards is at:
http://xfree86.org/
I think Redhat 7.X uses Ver 3.3.6 and 4 is current so look back at that
those docs. The up side it that ver 3 supports older cards that were
dropped in ver 4. If you dont have a box o stuff to dig in go to the
local computer fix it guy and trade him 5-10 bucks for a card with 8 or
if you want to splurge 16 meg of memory on it. These would be good for
as much as a 21 in. monitor.
Vince Negrete wrote:
need a fancy card and if you have to stick to PCI your choices are
limited any way. What I know works are the early ATI's Mach 64 based,
Rage and RageII+ and their varations. A comprehensive list of all
xfree86 supported cards is at:
http://xfree86.org/
I think Redhat 7.X uses Ver 3.3.6 and 4 is current so look back at that
those docs. The up side it that ver 3 supports older cards that were
dropped in ver 4. If you dont have a box o stuff to dig in go to the
local computer fix it guy and trade him 5-10 bucks for a card with 8 or
if you want to splurge 16 meg of memory on it. These would be good for
as much as a 21 in. monitor.
Vince Negrete wrote:
> Does anyone know a good brand of PCI Video card that has a good range of
> resolutions and works flawlessly with one of the BDI-EMC drivers?
> (the RedHat 7.2 version of BDI)
> I'm going out to get one today..
>
> Thanks
> Vince
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Vince Negrete
2003-05-27 08:57:41 UTC
EMC Video card hunt.
Markwayne
2003-05-27 12:20:05 UTC
Re: [CAD_CAM_EDM_DRO] EMC Video card hunt.
Stephan Kotzé
2003-05-27 13:21:54 UTC
Re: EMC Video card hunt.
Paul
2003-05-27 13:23:30 UTC
Re: [CAD_CAM_EDM_DRO] EMC Video card hunt.
JanRwl@A...
2003-05-27 16:38:49 UTC
Re: [CAD_CAM_EDM_DRO] EMC Video card hunt.