Re: G320 Rev2
Posted by
mgdcnc
on 2003-06-01 03:24:03 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "jeffdavis516" <cadman@p...>
wrote:
When I looked at your machine I remember you saying you needed to
hold the engage switch for 5 seconds. So when I built my controller
I figured I would have to do the same.
Mine engages right away also.
By the way thanks again for the great plans and the motors.
Been using the mill almost everyday since it has been done.
Check out my site for a few new parts I made.
Gary
http://home.attbi.com/~gragar1/cnc.htm
wrote:
> I just finished my second servo controller box. The first thing Iright
> noticed when I powered them up was the fact I did not have to hold
> the engage switch for 5 seconds to power them up. They came up
> away when the switch was activated. Does anyone know what otherselling?
> changes these new G320's have from the first set Mariss was
>Hi Jeff,
> Jeff Davis
> http://www.homecnc.info
When I looked at your machine I remember you saying you needed to
hold the engage switch for 5 seconds. So when I built my controller
I figured I would have to do the same.
Mine engages right away also.
By the way thanks again for the great plans and the motors.
Been using the mill almost everyday since it has been done.
Check out my site for a few new parts I made.
Gary
http://home.attbi.com/~gragar1/cnc.htm