CAD CAM EDM DRO - Yahoo Group Archive

Re: Crazy Ideas Vol 1 - way protectors

on 2003-06-03 10:25:13 UTC
I just put together some vinyl siding pieces to make some telescoping
way protectors. neat thing about vinyl is that you can get colors.

bad thing is that hot chips have their way with the stuff.

Dave




--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
>
>
> Stephan Kotzé wrote:
>
> >Anyone have a recommendation for homing switches. They obviously
need to be fairly repeatable. (optical, mechanical)
> >
> >
> To refine the accuracy of home switches, you can qualify them with
an
> optical interrupter-type sensor (many can be salvaged from old
floppy
> drives) that detects a slot in a disc mounted to the leadscrew.
This is
> essentially the same as the index channel on a shaft encoder.
>
> >I need an idea for cheap bellows to protect the linear guides and
leadscrews
> >
> >
> You might take a look at shop-vac hoses. Some of the cheaper ones
> are very stretchable, which isn't so good for vacuums, but makes
> a passable bellows. Goretite is REALLY expensive, like $200
> for one 3' length!
>
> Jon

Discussion Thread

Stephan Kotzé 2003-06-03 09:09:10 UTC Crazy Ideas Vol 1 turbulatordude 2003-06-03 09:50:14 UTC Re: Crazy Ideas Vol 1 - home switches Jon Elson 2003-06-03 09:54:25 UTC Re: [CAD_CAM_EDM_DRO] Crazy Ideas Vol 1 Robert Campbell 2003-06-03 10:08:49 UTC Re: [CAD_CAM_EDM_DRO] Crazy Ideas Vol 1 turbulatordude 2003-06-03 10:25:13 UTC Re: Crazy Ideas Vol 1 - way protectors dcdziner 2003-06-03 10:37:12 UTC Re: [CAD_CAM_EDM_DRO] Crazy Ideas Vol 1 alex 2003-06-03 11:47:51 UTC Re: [CAD_CAM_EDM_DRO] Crazy Ideas Vol 1 Chris Baugher 2003-06-03 16:39:22 UTC Re: [CAD_CAM_EDM_DRO] Crazy Ideas Vol 1 john_vreede 2003-06-04 10:25:16 UTC Re: Crazy Ideas Vol 1 - cheap bellows