RE: [CAD_CAM_EDM_DRO] Anilam Crusader 2
Posted by
Larry Ragan
on 2003-06-12 09:29:29 UTC
I have a Bridgeport Clone that had the Anilam Crusader 2 control. It
worked fine for about a year and then died. After pricing some of the
parts from Anilam I decided to switch. I have had it running under PC
control using Geco servo drives and Mach1 CNC software. I am in the
process of changing the Z axis control from the spindle to the knee, but
was very pleased with the performance. I used the motors, linear
encoders, and power supply that was used with the Anilam. I did have a
few issues with play in the y axis drive system but was able to resolve
that. If you would like you can contact me offline with any questions.
Larry Ragan
Larry.ragan@...
worked fine for about a year and then died. After pricing some of the
parts from Anilam I decided to switch. I have had it running under PC
control using Geco servo drives and Mach1 CNC software. I am in the
process of changing the Z axis control from the spindle to the knee, but
was very pleased with the performance. I used the motors, linear
encoders, and power supply that was used with the Anilam. I did have a
few issues with play in the y axis drive system but was able to resolve
that. If you would like you can contact me offline with any questions.
Larry Ragan
Larry.ragan@...
Discussion Thread
tylerwsmith869
2003-06-11 21:10:33 UTC
Anilam Crusader 2
Jon Elson
2003-06-11 21:47:35 UTC
Re: [CAD_CAM_EDM_DRO] Anilam Crusader 2
Larry Ragan
2003-06-12 09:29:29 UTC
RE: [CAD_CAM_EDM_DRO] Anilam Crusader 2
Tyler Smith
2003-06-19 00:36:41 UTC
RE: [CAD_CAM_EDM_DRO] Anilam Crusader 2
Larry Ragan
2003-06-19 16:05:16 UTC
RE: [CAD_CAM_EDM_DRO] Anilam Crusader 2