Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
Posted by
D.F.S.
on 2000-03-13 14:20:46 UTC
>Unfortunately I don't need one at the moment.
> From: stratton@...
>
> >
> > I'm not looking for a job or business, I have one, and this type of
> > stuff would never pay enough to bother with.
> >
> > On the other hand, sharing experience and resources doing what I
> > like to do for fun is another story.
> >
>
> I didn't mean to discourage you from the project, just to say that we
> will know a lot more about how compliated it is once someone has
> actually done it. There are sure to be complications that crop up,
> but if it goes smoothly for the first adventurer many of the rest of
> us may follow the lead.
>
One of my projects has steppers, and the other has big DC Servos with
at yet unidentified rotary encoders.
My concern at the moment would be a lot more about effectively mounting
and protecting the strip.
A strip prone to damage would be worse than useless, after a few
botched projects ruined by a hosed encoder.
That issue has little to do with the source of the strip or sensor.
That is the killer part of the project, not the strip and sensor IMHO.
Having the option to add other features to the sensor, like a constant
flow of clean air to blow crud away from the reader could be more of
an option with a self designed and fabricated reader.
BTW, the "No Adj. Necessary" "Feature" of the HP reader in this case
is exactly what prevents you from using a higher resolution strip.
The data sheet I have shows HP only has the HEDS-9200 reader in question
for 300 & 360 lines/Inch.
125, 250, 500, 1000/Inch or .02, .04, .08 mm or anything else sane for
the measurements we are looking for are simply not an option.
Marc
Discussion Thread
Par Willen
2000-03-11 02:44:07 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
D.F.S.
2000-03-13 09:40:15 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
stratton@m...
2000-03-13 10:48:53 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
D.F.S.
2000-03-13 12:59:18 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
jguenthe
2000-03-13 13:29:24 UTC
RE: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
stratton@m...
2000-03-13 13:52:07 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
D.F.S.
2000-03-13 13:59:00 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
D.F.S.
2000-03-13 14:20:46 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
stratton@m...
2000-03-13 14:41:44 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
james owens
2000-03-13 15:25:47 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
Jon Elson
2000-03-13 23:00:03 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL
stratton@m...
2000-03-14 06:44:51 UTC
Re: [CAD_CAM_EDM_DRO] DRO ENCODER TOOL