Re: DRO for mini-mill

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Harvey White <madyn@i...>
wrote:

>
> I've got a similar setup. Please check www.netcom.com/~madyn and go
> to metalworking. I've got the pictures of the X and Z axis up

there.

> The Y is similar to the X axis and on the left hand side. I used

two

> simple angle brackets.

Harvey, thanks, I tried that out but I can't get to the "X" page, the
link goes to nowhere. The "Z" page works fine.

John S.