Re: [CAD_CAM_EDM_DRO] Re: DRO for mini-mill

On Fri, 27 Jun 2003 22:16:41 -0000, you wrote:

>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Harvey White <madyn@i...>
>wrote:
>
>>
>> I've got a similar setup. Please check www.netcom.com/~madyn and go
>> to metalworking. I've got the pictures of the X and Z axis up
>there.
>> The Y is similar to the X axis and on the left hand side. I used
>two
>> simple angle brackets.
>
>
>Harvey, thanks, I tried that out but I can't get to the "X" page, the
>link goes to nowhere. The "Z" page works fine.

Let me look.

Ok, give it another try. I've got a size limitation on that page, and
something didn't load that I thought. I cut out the lathe autostop
and the electronics vise and that's probably better in terms of space.

Harvey

>
>John S.
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>