Re: [CAD_CAM_EDM_DRO] Multiple stepper motor drivers and software
Posted by
Harvey White
on 2003-07-20 11:17:12 UTC
On Sun, 20 Jul 2003 17:43:08 -0000, you wrote:
control up to 4 (or more) motors with step/direction. The parallel
port will control all the motors.
I would recommend an isolator board to protect your computer.
My own particular design uses 3 separate driver boards, and a common
power supply with an isolator board.
Harvey
>I am looking at 3 seperate motor/driver/power supplies to control a 3Turbo CNC will allow you to define pins on the parallel port to
>axis mill. Will I need an extra board for the software to talk to
>each driver giving it step and direction or does most software
>packages use specific pins on the parallel port connection and I
>would just wire them to each driver? I have seen many of the 3 or 4
>axis driver boards and that sparked this question when I saw these 3
>seperate motor/driver/power supplies offered on Ebay.
control up to 4 (or more) motors with step/direction. The parallel
port will control all the motors.
I would recommend an isolator board to protect your computer.
My own particular design uses 3 separate driver boards, and a common
power supply with an isolator board.
Harvey
>
>Thanks
>Scott
>
Discussion Thread
Scott Riddle
2003-07-20 10:43:11 UTC
Multiple stepper motor drivers and software
Harvey White
2003-07-20 11:17:12 UTC
Re: [CAD_CAM_EDM_DRO] Multiple stepper motor drivers and software