CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Working voltage for Servo Motors

Posted by Harvey White
on 2003-07-27 13:37:34 UTC
On Sun, 27 Jul 2003 20:20:05 -0000, you wrote:

>Hi All,
>
>What is the reason for the recommendations I have read that the
>supply voltage for servo motors should not exceed the nominal working
>volts by more than a few volts? In contrast the recommended voltage
>for stepper motors is 15 to 25 times nameplate voltage.

Servo motors have a very different driver, and different motor
characteristics.

Steppers are current limited with a chopper circuit, pulse driven, and
the higher voltage gets the di/dt (current change in the stepper coil,
hence torque) much better behaved at high pulse rates.

For all I know, you could do the same thing on a servo motor, but
that's not something I know much about.

Harvey


>
>Bottom line, how much over nameplate can you apply?

Servo, none... (my guess) stepper, as much as you want, but no more
current than the nameplate says...

H.

>
>Thanks
>
>Bernard
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Discussion Thread

Bernard R 2003-07-27 13:20:12 UTC Working voltage for Servo Motors Harvey White 2003-07-27 13:37:34 UTC Re: [CAD_CAM_EDM_DRO] Working voltage for Servo Motors Jon Elson 2003-07-27 19:54:05 UTC Re: [CAD_CAM_EDM_DRO] Working voltage for Servo Motors Bernard R 2003-07-27 22:41:28 UTC Re: Working voltage for Servo Motors