Re: New mill

Thanx Tim. Do you have any contact info for the fellow with the
servos?

In its current state the mill runs fine with the stock steppers and
API-CMD 260's (that I bought from you - they are SUPER drives) but
the machine is capable of so much more than the stock steppers can
provide -its a shame to leave them on the machine. I think I can
easily get 400ipm rapids with good servos and Gecko drives.


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Tim Goldstein" <timg@k...>
wrote:

> > -----Original Message-----
> > I need to replace the antiquated steppers
> > that are on it with some good servos that will work with Gecko
> > drives - anyone know where I can get some good ones? I think 26 -

35

> > in/lb motors somewhere near 2500rpm would fit the bill.
> >
> Welcome to the Series II click <g>
>
> Les Watts down in Georgia has some super nice servo motors that

would do

> a great job. You may want to contact him and see if he has any

left. I

> have seriously considered buying a set just to have as spares.
>
> Tim
> [Denver, CO]
> Sherline & Taig products at Deep Discount
> Mach1 & DeskCNC with credit card ordering
> www.KTMarketing.com/Sherline
> e-mail me at Timg @ KTMarketing.com for items not yet listed