Re: [CAD_CAM_EDM_DRO] Doesnt ANYONE have this drawn up??? was: John's CNC plans???

I passed some of my shop drawings on to Bill who has CAD'd a few of
them. The ball screw spindles we used would work for a 1.25" ballscrew
if the main diameter was increased.

I'm sure Bill will share, right Bill ?

Kim

On Wed, 2003-08-13 at 10:19, Vince Negrete wrote:
> I have to repeat this question since I know somebody has info but I'm
> guessin missed my post:
>
> If, anyone else has a good dimensional drawing for an End
> Bearing/Nut assy, that would work well with a 1.125" 5-tpi Ballscrew
> installed on a Bridgeport Style Knee-Mill I'd appreciate the info! The
> idea here is to adapt a proven Concept before I make a mistake incorrectly
> cutting the Ballscrews.... (a very expensive mistake)
>
> If I dont have the Terminology of the end-mount correct maybe this will help
> explain what I'm looking for:
> It mounts on the end of the Ballscrew affixing it to the Mill.
> Y-Axis should have One preloaded mountpoint typically with one bearing block
> assy., and X-Axis should have two bearing block assy's with one side
> preloaded. Maybe its my use of the word Preloaded that is confusing
> things.. My
> terminology might be messed up.
>
> The design would determine the cuts needed to modify my Ballscrew ends for
> refit onto the Mill.
>
> Thanks
> Vince
>
>
>
>
> ----- Original Message -----
> From: "Vince Negrete" <vnegrete@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Tuesday, August 12, 2003 10:43 PM
> Subject: [CAD_CAM_EDM_DRO] John's CNC plans??? was: PC Based CNC Mill For
> Hobby
>
>
> > I've inquired about these plans and recieved ZERO answer back.
> > John must be very busy. I was interested primarily in the design and
> > dimensions of the preload assy and was willing to do a purchase BUT, No
> > answer back..
> > If you get a reply let me know. Maybe I burned my bridge with that guy in
> > the past... Cant remember. :)
> >
> > Heck, if anyone else has a good dimensional drawing for a Preload
> > Bearing/Nut assy, that would work well with a 1.125" 5-tpi Ballscrew
> > installed on a Bridgeport Style Knee-Mill I'd appreciate the info! The
> > idea here is to adapt a proven Concept before I make a mistake incorrectly
> > cutting the Ballscrews.... (a very expensive mistake)
> >
> > Vince
> >
> >
> > ----- Original Message -----
> > From: "Antonius J.M. Groothuizen" <agroot@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Tuesday, August 12, 2003 7:34 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: PC Based CNC Mill For Hobby
> >
> >
> > > Artisan,
> > >
> > > If you want to build your own, do a net search for "Hobby CNC" and
> > > variations. There are several sites selling plans. John
> > > Kleinbauer's website is a good source of imformation. He only ships
> > > plans to US and Canadian addresses, but ther are links on his website
> > > for more information.
> > >
> > > Tony
> > >
> > >
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "fanuc_cnc" <fanuc_cnc@y...>
> > > wrote:
> > > > Hi all Groupist
> > > >
> > > > I am Want to make PC Based low cost CNC Table Top Mill.
> > > > For that Any one who can hepl me how to get stepper motor
> > > controler ,
> > > > Which is best,which software i can use,
> > > > Mechanical side is easy to manufacture for me
> > > >
> > > > thanks
> > > > Artisan
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > > Moderator: pentam@... indigo_red@... [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> > sister site to the CCED group, as many of the same members are there, for
> OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> > >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Kim Lux <lux@...>